Locating The Cart; Cart Assembly Instructions - DCS CAD1 series Installation Instructions And User Manual

Locating the cart

For proper use, this product should be installed/positioned
on a flat ground or patio. Unevenness such as bumps, cracks
and protrusions should be
and the below table for required flat area dimensions.
REQUIRED FLAT AREA
A
Width
B
Depth

Cart assembly instructions

IMPORTANT!
Some parts have sharp edges; care must be taken when handling
the various components to avoid injury. Please read safety
information provided in these instructions before beginning
assembly. Wear gloves when handling.
Two or more people should work together to assemble the cart and
All-Grill, Double Side Burner/Sink, or Double Side Burner/Griddle.
Avoid using side shelf to move cart. Push or pull the cart by
grasping corners of head.
Content included
Your cart is packaged in one box. The box contains your cart and a universal hardware kit to be used
for grill installation and may contain extra hardware for your convenience.
Table of quantity of parts
CONTENTS
30" Cart shown
CONTENTS
Machined Phillip
screws 10-24X1/2"
Bracket, Tab
Bolt Hex
1/4-20-12"
Washer
.313 x .750
Nut Hex
1/4-20
6
INSTALLATION
¼
" or less. Refer to illustration
CAD1-36/36E
Inches (mm)
36 (914)
48 (1219)
MODEL PART NO.
CAD1-30 71131
CAD1-36 71132
CAD1-36E 71407
CAD1-48 71133
CAD1-48E 71408
CAD1-
CAD1-36/36E
30
13 16
2 2
2 2
4 4
2 2
CAD1-48/48E
Inches (mm)
48 (1219)
48 (1219)
Tools required
QTY.
1
1
1
1
1
CAD1-48/48E
17
4
2
4
2
A
Top view (with
drawers open)
Eye Goggles
Work Gloves
Power Screwdriver or Variable
Speed Drill with Phillips - tip #2
Attachment
5/32" Allen Wrench
3/16" Allen Wrench
3/32" Allen Wrench
B