Using The Cart; Removing Drawers; Re-Installing Drawers - DCS CAD1 series Installation Instructions And User Manual

Removing the drawers
IMPORTANT!
To prevent personal injury or damage to the drawers, do not overload them. The maximum rating of
each drawer is 35 pounds.
1 To remove the drawers, pull them out until their slider latch is visible. Carefully push the latch down
on the left side while pulling up on the latch on the right side and pull the drawer completely out of
the frame.
2 To prevent damage to surfaces, place the drawers on a stable surface on a protective towel or
tablecloth while removed from the cart.
Re-installing the drawers
1 Re-install the drawers by extending their
guides.
18

USING THE CART

2 While holding the drawer parallel to the
cabinet, carefully align & engage the ends of
the glides. Slide the drawer about an inch so
that the glides are supporting the back of the
drawer.