Freezer Pack (Optional) - DCS CAD1 series Installation Instructions And User Manual

Re-installing the drawers
1 While holding the drawer up by the handle,
pull the glides from the drawer cavity out
over the drawer glide until they click.
3 Install the two racks provided into the
opening by sliding them onto the rollers on
the sidewalls of the left cavity.
Freezer pack (optional, kit #70696A)
1 Place the freezer pack in freezer, laying it flat.
2 Freeze overnight or a minimum of eight hours.
3 Place frozen freezer pack in the steel tray on the second shelf, in appropriate cavity of the drawer.
The freezer pack is dishwasher safe. Or wash with warm soapy water, rinse and air dry. Store flat in
dry storage or in freezer.
USING THE CART
2 As you push the drawers in, you will
encounter moderate resistance. Continue to
push the drawer all the way in to complete
the engagement process. The drawer will now
glide smoothly in and out with light effort.
Rack & rack cover
Drain drawer
19