Security Menu - MiTAC MiStation EC-900 User Manual

Security Menu

The Security menu contains the security settings, which safeguard your system
against unauthorized use.
Main Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus protection
02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
V
Supervisor/User Password shows whether you have set the supervisor/user
password for the system.
Change Supervisor/User Password creates or changes the supervisor/user
password. When typing the password, first make sure that Num Lock is off, and
then type the password in the entry fields and press
password by typing it again and pressing
password to be required for starting up the system and/or entering BIOS Setup.
NOTE: You can set the user password only when the supervisor password has been set.
NOTE: If both the supervisor and user passwords are set, you can enter any of them for starting
up the system and/or entering BIOS Setup. However, the user password only allows you to
view/change the settings of certain items.
Boot Sector Virus Protection helps prevent computer viruses by protecting
the hard disk boot sector (partition table) from any change if enabled. Default is
disabled.
Using BIOS Setup
Boot Security Exit
:
Not Installed
:
Not Installed
[Enabled]
Enter
Install or Change the
password.
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC EXIT
. Confirm your
Enter
. You can set the supervisor/user
5-9