CalAmp Sentry 4G-900 Pico Base Station Installation And Setup Manual page 23

2. Connect the Data Adapter to a Switch/Router by interconnecting the Data Adapters'
Ethernet port and the Switch/Router 10/100 Base T-port using a Cat5e cable.
3. Connect the Data Adapter to the 110V/220V AC mains using the supplied cable.
B
EFORE CONNECTING THE DATA ADAPTER TO THE MAIN OUTLET VERIFY THAT ALL SYSTEM COMPONENTS ARE
PROPERLY INSTALLED
4. Verify that the Data Adapter LEDs, located on the front panel, are
status.
Data Adapter LED Indicators
The table below provides a description of the Data Adapter LED indicators.
Table 3. Data Adapter LED Description
LED
PWR
LAN
Ready
. M
AKE SURE THAT ALL CABLE CONNECTORS ARE SECURELY POSITIONED IN THE
Figure 6: Data Adapter Front Panel
Color Description
Green Input power is connected
Green LAN link/activity display
Green System ready display
I !
MPORTANT
.
APPROPRIATE PORTS
Green
indicating an OK
23