3.4.6
Antenna Connections
T
HE PART OF THE ANTENNA THAT IS CONNECTED TO THE CENTRAL PIN OF THE
ANTENNA CONNECTOR SOULD BE COVERED BY ISOLATION MATERIAL WHICH IS
SUFFICIENTLY RESISTANT TO DEGRADATION BY ULTRA
Note: See 2.1.3 for antenna grounding requirements.
Connect the omni-antennas to the N-Type ANT1 and ANT2 connectors and connect the
grounding lug to the common ground.
Caution: This device has been designed to operate with the antenna described below, and
having a maximum gain of 7.15dBi. Other antennas or having an antenna with a gain greater
than 7.15dBi are strictly prohibited for use with this device. The required antenna impedance is
50Ω.
Antenna Information: MAXRAD model MFB 9155
The installation of this equipment and the antenna must be performed by a professional.
I
!
MPORTANT
-
VIOLET
(UV)
.
RADIATION
21