Alarms
The following alarms can be generated by the ECG feature and displayed
on the petMAP+II:
No ECG Detected
O2 Sensor? ECG?
Situation:
The ECG signal or
waveform amplitude is
insufficient to be detected.
Probable causes and/or
suggestions:
The patient has no cardiac
electrical activity or rhythm.
The amplitude or strength is
inadequate. Adjust the
electrodes, and/or increase
the gain.
NOTE: The "No ECG detected"
alarm becomes "O2 Sensor? ECG?"
if at the time the no ECG detected
alarm is triggered, there is already a
SpO2 alarm active.
or
ECG Lead OFF?
or
ECG: Lead? Switches?
Situation:
Either a lead is off or the
ECG module has incorrect
switch settings.
Probable causes and/or
suggestions:
Check the ECG leads.
Reposition electrodes and
add gel to surface leads if
necessary.
Check to make sure that
both switches are correct:
o Esophageal or surface
o Gain
15