Operating Instructions/User Selections - Ramsey Medical petMAP+ II Operator's Manual

Operating Instructions/User Selections.
1) Follow the instructions (previous page) for placing lead wires or
inserting the esophageal probe.
3) This is an example of a
screen display when the
ECG waveform is of adequate
size. A little larger is fine
(better), but it should be no
smaller. If smaller, increase the
gain using the Gain slide switch
on the ECG Module.
2) Turn ECG on by pressing the
highlighted ECG ON/OFF button
on the petMAP+II. Verify the
Green LED on the ECG module
near the petMAP+II connector
is ON, indicating the ECG
module is powered.
13