Table of Contents
Advertisement
nRF24L01P wireless module
3. Recommended Circuit Diagram
No.
CE pin can be high level for long-term, but it needs to set as POWER DOWN mode when the module writes registers, and it is
1
recommended that CE is controlled by MCU pin.
As interrupt pin for IRQ, it can be used to wake-up MCU and achieve fast response;
2
But the user can get the interrupt status through SPI (not recommended, it is not conducive to the overall power consumption, and with
low efficiency）.
4. Electrical Parameters
In different power of nRF24L01P, the real transmitting power of E01-2G4M27D, 3.3V, as below:
Copyright ©2012–2017，Chengdu Ebyte Electronic Technology Co.,Ltd.
14
Brief introduction of connection between module and MCU (STM8)
E01 series user manual
Hide quick links:
Advertisement
Table of Contents
