Stop; Switch Off; Schedule And Standby - Gardena SILENO city Operator's Manual

4.3.1 Main area
Main area is the standard operating mode where
the product mows and charges automatically.
4.3.2 2nd area
To mow secondary areas the operating mode
2nd area must be chosen. Selecting 2nd area
means that the product mows until the battery is
empty.
If the product is charged in the
will fully charge, drive out about 50 cm and then
stop. This indicates that the product is charged
and ready to start mowing. If the main work area
is to be cut after charging, it is recommended to
change the operating mode to
placing the product back in the charging station.
4.3.3 Park
Park means that the product
Operating mode
remains in the charging station until a different
operating mode is selected.
4.3.4 Park / Schedule
Operating mode Park / Schedule means that the
product remains in the charging station until the
next schedule or standby permits operation.
Schedule and Standby on page 30 .
Refer to
4.3.5 Override schedule
The schedule settings can be temporarily
overridden by selecting Override schedule . It is
possible to override the schedule for 3 h. It is not
possible to override a standby period.
4.3.6 Spot cutting
Only for SILENO life and smart SILENO life.
Spot cutting is useful for quickly mowing an area
where the grass has been mown less than in
other parts of the garden. You must manually
move the product to the chosen area.
30 - Operation
Spot cutting means that the product mows in a
spiral pattern in order to cut the grass in the area
where it was started. When this is done, the
product automatically switches back to
or
The
START button. You can select how the product
should continue to work once mowing is finished
by pressing right arrow key and then specifying
On Main area or On Secondary area .

4.4 Stop

1.
The product stops and the blade motor stops.
2nd area mode, it
Main area before

4.5 Switch off

1.
2.
3.
4.
5.

4.6 Schedule and Standby

The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn.
Secondary area .
Spot cutting function is activated with the
Press the STOP button on top of the
product.
Press the STOP button.
Open the hatch.
Press the ON/OFF button for 3 seconds.
The product shuts down.
Check that the indicator lamp on the
ON/OFF button is not lit.
953 - 002 - 12.12.2018
Main area