Table of Contents
Advertisement
Equipment Settings
Conventional Systems
You must enter an Installer Password to access the EQUIPMENT SETTINGS from the Main Menu.
The following settings can be changed for Conventional Systems:
MIN ON/OFF TIME
FAN ON IN HEAT
(this option only
applies to the furnace)
Page 36
DEFAULT
3 MIN
Minimum cycle time for the furnace/air conditioner.
YES
The fan turns on when the
thermostat sends the fan on
signal. If the Fan Mode is
AUTO the thermostat will turn
the fan on whenever the furnace
is turned on.
OPTION
1-6 MIN
NO
The furnace waits until enough
heat is built up before turning on
the plenum fan. The furnace
controls the fan when the Fan
Mode is AUTO.
Advertisement
Table of Contents
