Temporary Hold - Tantalus ST-1480 Operating And Installation Manual

Smart thermostat
Table of Contents

Advertisement

Temporary HOLD

You temporarily adjust the temperature warmer or cooler, without affecting the pre-set
programming, through the use of a temporary hold. The thermostat will remain at the temporary
HOLD temperature until the next scheduled SETPOINT.
When TEMPORARY HOLD is engaged the screen will be as shown below:
From the home screen, press either of the SCROLL buttons to
view this screen. Continue to press either of the SCROLL buttons
to highlight the operating target SETPOINT (HEAT or COOL),
which will be underlined.
Press the SELECT button to toggle between the HEAT and COOL
temperatures.
Set the desired temperature using the SCROLL buttons.
Press the LEFT TAB to ENGAGE HOLD, or RIGHT TAB to
CANCEL and return to the normal Home Screen.
To cancel a HOLD, press a SCROLL button to return to this
screen.
Press the RIGHT TAB to CANCEL HOLD, or LEFT TAB to
ENGAGE HOLD (continue the HOLD) and return to the normal
Home Screen.
Page 13

Advertisement

Table of Contents
loading

Table of Contents