Utility Conserve Mode - Tantalus ST-1480 Operating And Installation Manual

Utility Conserve Mode

If your utility offers a energy reduction plan and you are enrolled in the program, your utility can
start a Utility Conserve Mode. This allows your utility to send a signal over the communications link
to increment the temperature a few degrees (when using the cooling system) or decrement it a few
degrees (when using the heating system).
If a temporary HOLD or the current scheduled SETPOINT expires, the incremental temperature
change is applied to the next scheduled SETPOI N T.
Page 28
At this point, the thermostat will set back the current SETPOINT
(HOLD or scheduled SETPOINT) by a fixed value of 2°C to
conserve energy. The SETPOINT's name at the Home Screen of
the thermostat will be replaced by a label showing "Conserve".
When entering a Utility Conserve Mode, your thermostat will show
the word "UTILITY" under the room temperature and the Conserve
Status Light turns on Amber