Canon imageRUNNER iR2270 Service Manual page 30

Set value
0: Not display the key
1: Display the key
Default value: 0
Note:
When this key is set to "1", the device will always respond "0" to the demands of job history
reference from the remote applications.
Accountant, which manages the device using the job history, cannot be used.
3. OFF/ON of connection devices
When the setting of the Service mode is changed, need to turn off/ on the power of
connection devices.
1) Press the power switch on the control unit for 3 seconds or more.
2) Following the instructions displayed on the shutdown sequence step by step with
operations to select appropriate items on the touch panel so that the main switch can be
ready for turning off.
3) Turn the main power off.
Therefore, software, such as NetSpot
Chapter 3
3-11