Backup of MEAP applications
If any of MEAP applications is already installed, data and a license stored in the MEAP
application is deleted. However, you don't need to consider it if MEAP applications are not
If a MEAP application has the backup function, be sure to backup data specific to the
MEAP application using the function. For licenses, it is necessary to stop all applications
from SMS (Service Management Service), disable the licenses, and download the disable
Note: MEAP backup function using SST
Concerning data backed up with MEAPback of SST before starting the security kit, it must
not be re-written to the iR machine after the security kit starts to run. Also, if data backed
up after the security kit starts to run is re-written to an iR machine that the security kit is yet
to run, it does not work properly. It is absolutely necessary to match operating conditions
of the security kit before and after backup work. For that reason, backup is impossible with
the MEAP backup function while installing the security kit.
The following procedures are for stopping MEAP applications, disable licenses, and
downloading license files. Refer to the MEAP SMS Administrator Guide for details.
Stopping/Disabling MEAP applications, Downloading license files, Uninstalling
(1) Select the following URL to access SMS.
http://[Device IP Address]:8000/sms
If user changed a SMS password from a default, ask the user to login or ask the user to
change the password after the security kit starts to run. The default password is
SMS password will be initialized after the security kit starts to run.
Therefore, be sure to ask user to change a password.
(2) Select the radio button of an application to be stopped from the application list page, and