Hardware Properties; Basic Station; Basic Settings - YX Series User Manual

7.4.3 Hardware properties

The screenshot below shows the operation mode to set Hardware properties.
The columns are specified as following:

Port No: The GoIP Gateway mobile port. Each port contains one or four card slots. Port No
starts from 1 to 32.

Type: Values are GSM/CDMA/WCDMA. (According to your module.)

Disable: Specify whether enable or disable this port.

Bind SIM Card: The SIM card that not bind will be locked by gateway.

Input Volume: Specify the input voice volume of this port.

Output Volume: Specify the output voice volume of this port.

Balance: Shows the current balance of sim card

Operations:
 Restart: Restart the module
 More:
 Hot-line: Specify a sip phone on the softswitch to pick up the incoming calls
 UnconditionalForward/NoAnserForwardNumber/BusyForward: These parameters are
designed to be used with a third party system.

7.5 Basic Station

7.5.1 Basic Settings

The screenshot below shows the operation mode to set globally for base settings.
YX Technical department
GSM/CDMA/WCDMA VoIP Gateway
~ 26 ~