Sip Setting - YX Series User Manual

7.3 SIP Setting

SIP Settings will be described in this paragraph. It mainly targets to set up parameters related to
SIP server, SIP account and SIP password for SIP registration.
The screenshot below shows the operation mode to set SIP running parameters.
Fields are specified as following:

Protocol Mode: Specify SIP client working mode. Option values are
Registration/Point-to-Point/Multiple Port Support. If set to Registration, SIP client will send
registration messages to SIP server. If set to Point-to-Point, o nly can let the input server IP
traffic, if multiple IP, can increase in the phone book. If set Multiple Port Suppor, specify
whether support to register to SIP server with different SIP Account, input in "SIP
Accounts".

Encryption Mode: Specify the encryption method for messages between SIP server and
SIP client.

Account: Specify the SIP account for registration.

Password: Specify the SIP password for registration.

SIP Server: Specify the domain or IP of the SIP Server.

SIP Server Port: Specify the port of the SIP Server.

Primary Proxy IP: Specify the primary proxy IP.

Secondary Proxy IP: Specify the secondary proxy IP.

Expiration Period: Specify the expiration period for registration.

Local Port: Specify the local port used to register to SIP server.

Use Phone Number: Specify whether enable phone number registration or not. If set to
Enabled, the Phone Number and Account can be different when registering to SIP Server.
If set to Disabled, the Phone Number must be the same as the Account when registering,
otherwise, the registration will fail.
YX Technical department
GSM/CDMA/WCDMA VoIP Gateway
~ 20 ~