Grecom 0715 Owner's Manual page 84

Modulation
Scan Lists
Delay Time
Zeromatic
Search Dir
LED Flash
LED Color
Latch LED
0715 User Manual
SRVC
Options
Parameter
to
scroll,
SEL
Groups
to toggle
on/off
Alpha-
Tag
numeric
text
AM, FM,
NFM, AU
On or Off
for Scan
Lists 1-20
Delay
On or Off
1-200
L/Out
On or Off
On or Off
Atten
On or Off
Solid or
Flash
0-7
On or Off
Description
Toggle search groups when Pub Safety, Aircraft
and Amateur service searches are used.
The alphanumeric display name for the SRVC
search. Use the standard text entry method or
QTXT to name the object.
Modulation setting for the SRVC search. In most
cases AU will work fine. Use AM to override and
force AM modulation, FM to force FM
modulation, NFM to force narrow FM modulation.
Sets membership in Scan Lists. Use
scroll through scan lists. Use
Scan List membership.
Controls whether a Delay is used to wait for reply
traffic after a transmission on the SRVC search.
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay is
On, e.g., 20=2 seconds.
Permanent lockout for the SRVC object. Also
accessed by pressing
FUNC L/OUT
scanner is stopped on the SRVC object.
When on, enhances the scanner s ability to lock
on to the actual center frequency of a search hit
instead of an adjacent frequency.
When on, applies 20 dB of attenuation to all hits
received on the SRVC search. Useful in areas
where interference from nearby strong signals is
present.
Sets search direction used when SRVC object is
active.
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
Sets LED color to 0-7 as defined in the GLOB
menu. By default, 0=LED Off, 1=Red, 2=Yellow,
3=Green, 4=Cyan, 5=Blue, 6=Magenta, 7=White.
Normally the ALERT LED is active only while the
object is receiving a transmission. When Latch is
on, the ALERT LED will remain lit after the
transmission is complete, unless overridden by a
subsequent object that is also using the ALERT
LED.
keys to
key to toggle
SEL
while the
Page 80