Grecom 0715 Owner's Manual page 74

Color 0-7
Search Delay
LCD BlinkOn
LCD BlinkOff
LED BlinkOn
LED BlinkOff
Battery Info
Charge Time
PC/IF Send
Clone Send
Clone Recv
Clear Hits
Clear FAV
Memory Info
0715 User Manual
GLOB
Options
Parameter
RGB value
1-100 x
100 mS
1-250 x 10
mS
1-250 x 10
mS
1-250 x 10
mS
1-250 x 10
mS
SEL
0-99
SEL
SEL
SEL
SEL
SEL
SEL
Description
Sets intensity of red, green and blue LEDs. Press
to edit colors. Use
SEL
G or B LED settings. Use numeric keys to
activate preset intensity levels for each LED, or
use keys to fine scroll intensity.
Sets wait for reply delay for all search modes
For alternating text displays, sets the display time
for the primary display element.
For alternating text displays, sets the display time
for the secondary display element.
When the ALERT LED setting for an object is set
to Flash, this is the amount of time the LED stays
turned on.
When the ALERT LED setting for an object is set
to Flash, this is the amount of time the LED stays
turned off.
Displays current battery voltage, DAC value and
charge time remaining if battery is charging.
Battery charge time in hours. 0=charger off. The
battery charger is timer based and charges at a
current rate of 150 mA. The charger is disabled
when BATTERY is set to Alkaline. A default
charge time of 9 hours is used for NiCAD
batteries, and 16 hours for NiMH batteries.
Press to send contents of main memory to a
SEL
PC connected to the PC/IF port.
Press to send data using clone mode
SEL
Press to receive data using clone mode
SEL
Press to clear all hit counters.
SEL
Press to clear the Favorites scan list.
SEL
Press to see the current memory usage.
SEL
keys to scroll to R,
Page 70