Tgrp Menu Reference - Grecom 0715 Owner's Manual

TGRP Menu Reference

The TGRP menu is used when creating new Trunking Talkgroup
objects, or editing existing Trunking Talkgroup objects. All menus
are shown in the scanner s display as a three line window that
can be scrolled up or down to access the various different
parameters. The active parameter is always the middle
parameter and is indicated by a flashing ":". The entire TGRP
menu is shown below:
Scan Lists
Delay Time
LED Flash
0715 User Manual
TGRP
Options
Parameter
New or
previously
stored
TSYS
trunking
system
object
(TSYS)
Decimal,
hex or AFS
ID
depending
on TSYS
type
Group or
Type
Private
Alpha-
Tag
numeric
text
On or Off
for Scan
Lists 1-20
Delay
On or Off
1-200 x
100 mS
L/Out
On or Off
Priority
On or Off
Solid or
Flash
Description
To enter a new trunking system, use the
keys to scroll through the stored systems until
NEW appears, then press
SEL
parameters for the new TSYS. To use a trunking
system that you have previously entered, use the
keys to scroll to the desired system.
The digital address of the talkgroup or individual
radio ID on the trunked radio system.
Use Group for talkgroup ID, Private for individual
radio ID.
The alphanumeric display name for the TGRP.
Use the standard text entry method or QTXT to
name the object.
Sets membership in Scan Lists. Use
scroll through scan lists. Use
Scan List membership.
Controls whether a Delay is used to wait for reply
traffic after a transmission on the TGRP.
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay is
On, e.g., 20=2 seconds.
Permanent lockout for the TGRP. Also accessed
by pressing
FUNC L/OUT
stopped on the TGRP object.
Turns Priority Mode on or off for the TGRP
object.
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
to enter the
keys to
key to toggle
SEL
while the scanner is
Page 73