Setting Client Ip Filters - Belkin F6D4230-4 User Manual

20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008 clean.doc
Page 66 of 114

Setting Client IP Filters

The Router can be configured to restrict access to the Internet, email, or other
network services at specific days and times. Restriction can be set for a single
computer, a range of computers, or multiple computers.
[insert Client_IP_Filter.tif]
To restrict Internet access to a single computer for example, enter the IP address
of the computer you wish to restrict access to in the IP fields (1). Next, enter "80"
in both the port fields (2). Select "Both" (3). Select "Block" (4). You can also
select "Always" to block access all of the time. Select the day to start on top (5),
the time to start on top (6), the day to end on the bottom (7), and the time to stop
(8) on the bottom. Select "Enable" (9). Click "Apply Changes". The computer at
the IP address you specified will now be blocked from Internet access at the
times you specified. Note: Be sure you have selected the correct time zone
under "Utilities> System Settings> Time Zone".
(2)
(1)
(5)
(6)
[insert Client_IP_Filters_Detail.tif]
(3)
(8)
(4)
(9)
(7)