Configuring Internal Forwarding Settings - Belkin F6D4230-4 User Manual

20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008 clean.doc
Page 64 of 114
[insert Firewall.tif]

Configuring Internal Forwarding Settings

The Virtual Servers function will allow you to route external (Internet) calls for
services such as a web server (port 80), FTP server (Port 21), or other
applications through your Router to your internal network. Since your internal
computers are protected by a firewall, computers outside your network (over the
Internet) cannot get to them because they cannot be "seen". A list of common
applications has been provided in case you need to configure the Virtual Server
function for a specific application. If your application is not listed, you will need to
contact the application vendor to find out which port settings you need.