Setting Up An Allow Access List; Setting Up A Deny Access List - Belkin F6D4230-4 User Manual

20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008 clean.doc
Page 61 of 114

Setting up an Allow Access List

1. Select the "Allow" radio button (1) to begin setting up a list of computers
allowed to connect to the wireless network.
2. Next, in the "MAC Address" field that is blank (3), type in the MAC address of
the wireless computer you want to be able to access the wireless network,
then click "<<Add" (4).
3. Continue to do this until all of the computers you want to add have been
entered.
4. Click "Apply Changes" (5) to finish.

Setting up a Deny Access List

The "Deny Access" list lets you specify computers that you DO NOT want to
access the network. Any computer in the list will not be allowed access to the
wireless network. All others will.
1. Select the "Deny" radio button (2) to begin setting up a list of computers to be
denied access to the wireless network.
2. Next, in the "MAC Address" field that is blank (3), type in the MAC address of
the wireless computer you want to deny access to the wireless network, then
click "<<Add" (4).
[insert Mac_Address.tif]