Table of Contents
Advertisement
61
USER MANUAL
1. Enabling camera channels:
http://camera_ip/get?channelenable
http://camera_ip/set?channelenable=(1..15 as a 4-bit mask where each bit
corresponds to one camera channel, LSB is channel 1)
2. Image rotation:
http://camera_ip/get<channel>?rotate
http://camera_ip/set[<channel>]?rotate=(0¦180)
3. Brightness:
http://camera_ip/get<channel>?brightness
http://camera_ip/set<channel>?brightness=(-50..+50)
4. Sharpness:
http://camera_ip/get<channel>?sharpness
http://camera_ip/set<channel>?sharpness=(0..4)
5. Saturation:
http://camera_ip/get<channel>?saturation
http://camera_ip/set<channel>?saturation=(0..6)
6. Blue balance:
http://camera_ip/get<channel>?blue
http://camera_ip/set<channel>?blue=(-10..+10)
7. Red balance:
http://camera_ip/get<channel>?red
http://camera_ip/set<channel>?red=(-10..+10)
8. Illumination:
http://camera_ip/get<channel>?illum
http://camera_ip/set<channel>?illum=("auto"¦"indoor"¦"outdoor"¦"mix")
9. Mains frequency, Hz (for indoor lighting compensation):
http://camera_ip/get<channel>?freq
http://camera_ip/set<channel>?freq=(50¦60)
10. Exposure mode (low light mode):
http://camera_ip/get<channel>?lowlight
http://camera_ip/set<channel>?lowlight=("highspeed"¦"speed"¦"balance"¦"qu
ality"¦"moonlight")
CBC (America)
www.computarganz.com
Advertisement
Table of Contents
