Table of Contents
Advertisement
17
USER MANUAL
Install Selected ‒ this function installs the selected cameras and
verifies their operation in a way similar to the Install Cameras
function in Basic mode. When one or more cameras are selected
(highlighted), the selected cameras will be installed and the
unselected ones will be skipped. When no cameras are selected
(highlighted), the Installer will install all cameras available.
TIP: All cameras marked as Installed, locked will be skipped in
order to protect previous installations from accidental changes.
To change the status of those cameras, please refer to the Find
Cameras section.
Unselect All ‒ Deselect all cameras.
View Selected ‒ Open a web-browser to view the selected
camera s HTTP interface where users can watch the live video
and configure the camera.
TIP:
Double-click
the
selected
camera
in
Result
or
Model/Version section has the same effect.
Edit Selected ‒ Open an Advanced dialog to edit the selected
camera s IP address and/or add a camera specific description to
the selected camera.
TIP: Double-click the selected camera in IP
a ddress or
Descrip ti on section has the same effect.
Add Remote Units ‒ Open an Advanced dialog to add a camera
manually. This feature is designed for application scenarios
where the camera to be installed is on another sub-net that is not
reachable by broadcasting. Users should use this feature only if
the camera s MAC and IP addresses are known and the
connectivity has been verified.
Save/ Exit ‒ Save the information of the installed cameras into a
file LocalMachine.ini for CBC America Video System and export
a plaintext list of cameras into a file CameraList.txt for third
party software, then exit the Installer.
CBC (America)
www.computarganz.com
Advertisement
Table of Contents
