Lancia Voyager 2013 Owner's Handbook Manual page 92

and follow the audible prompts for
directions. All Uconnect™ Phone ses-
sions begin with a press of the
ton on the radio control head.
Cancel Command
At any prompt, after the beep, you
can say "Cancel" and you will be re-
turned to the main menu. However, in
a few instances the system will take
you back to the previous menu.
Pair (Link) Uconnect™ Phone To
A Mobile Phone
To begin using your Uconnect™
Phone, you must pair your compatible
Bluetooth® enabled mobile phone
(refer to "Compatible Phones" section
to learn about the phone type).
To complete the pairing process, you
will need to reference your mobile
phone owner's manual.
Uconnect™ website may also provide
detailed instructions for pairing.
The following are general phone to
Uconnect™ Phone pairing instruc-
tions:
• Press the button to begin.
86
• After the "Ready" prompt and the
following beep, say "Setup Phone
but- Pairing".
• When prompted, after the beep, say
"Pair a Phone" and follow the au-
dible prompts.
• You will be asked to say a four-digit
Personal Identification Number
(PIN), which you will later need to
enter into your mobile phone. You
can enter any four-digit PIN. You
will not need to remember this PIN
after the initial pairing process.
• For identification purposes, you
will be prompted to give the
Uconnect™ Phone a name for your
mobile phone. Each mobile phone
that is paired should be given a
unique phone name.
• You will then be asked to give your
The
mobile phone a priority level be-
tween 1 and 7, with 1 being the
highest priority. You can pair up to
seven mobile phones to your
Uconnect™ Phone. However, at
any given time, only one mobile
phone can be in use, connected to
your Uconnect™ System. The pri-
ority allows the Uconnect™ Phone
to know which mobile phone to use
if multiple mobile phones are in the
vehicle at the same time. For ex-
ample, if priority 3 and priority 5
phones are present in the vehicle,
the Uconnect™ Phone will use the
priority 3 mobile phone when you
make a call. You can select to use a
lower priority mobile phone at any
time (refer to "Advanced Phone
Connectivity").
Dial By Saying A Number
• Press the button to begin.
• After the "Ready" prompt and the
following beep, say "Dial."
• The system will prompt you to say
the number you want to call.
• For example, you
"151-1234-5555."
• The Uconnect™ Phone will con-
firm the phone number and then
dial. The number will appear in the
display of certain radios.
can say