Mitsubishi MOTORS Lancer 2004 Workshop Manual page 336

54A-58
STEP 6. Check the wiring harness between
combination meter connector C-04 (terminal 9)
and ignition switch (IG1).
Connector: C-03, C-04
<L.H. drive vehicles>
Harness side
C-03
C-04
Connector: C-04
<R.H. drive vehicles>
Harness side
NOTE:
Connector: C-210, C-212
<L.H. drive vehicles>
Front view
C-210
C-212
Harness side
CHASSIS ELECTRICAL
COMBINATION METER ASSEMBLY
C-04
C-03 (B)
AC303798 AU
AC303814 AT
C-210
C-212
AC303809 AX
Connector: C-210, C-212
<R.H. drive vehicles>
Front view
C-210
C-212
Harness side
Prior to the wiring harness inspection, check
Junction block connectors C-210 and C-212, joint
connector C-03 <LH drive vehicles>, and repair if
necessary.
Q: Are the wiring harness between combination meter
connector C-04 (terminal 42) and ignition switch
(IG1) in good condition?
There is no action to be taken.
YES :
Repair or replace the wiring harness. Check
NO :
to see that all meters operate.
C-210
C-212
AC303823 AU