Table of Contents
Advertisement
Quick Links
POWERCAP
POWERED RESPIRATOR SYSTEM
EN397 + A1:2012 Head Protection
EN166:2001 Eye & Face Protection
EN12941:1998 + A2:2008 Respiratory Protection
IMPORTANT: This manual must be read in full
before the product is used. This manual must
be retained for future reference.
INFINITY
®
®
JSP Ltd, Worsham Mill, Minster Lovell Oxfordshire, OX29 0TA
Technical Helpline: +44(0)1993 826051
Email: technicalservices@jspsafety.com www.jspsafety.com
Certified by: BSI (NB0086).
BSI UK, Kitemark Court, Davy Avenue, Knowlhill,
Milton Keynes, MK5 8PP. United Kingdom
ISSUED: 02/18
RFPZ-001-000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JSP Powercap Infinity
Summary of Contents for JSP Powercap Infinity
- Page 1 INFINITY ® ® POWERED RESPIRATOR SYSTEM EN397 + A1:2012 Head Protection JSP Ltd, Worsham Mill, Minster Lovell Oxfordshire, OX29 0TA EN166:2001 Eye & Face Protection Technical Helpline: +44(0)1993 826051 Email: technicalservices@jspsafety.com www.jspsafety.com EN12941:1998 + A2:2008 Respiratory Protection IMPORTANT: This manual must be read in full Certified by: BSI (NB0086).
-
Page 2: Table Of Contents
This manual must be retained for future reference. A copy of this manual and the Declaration of Conformity for the product can be found on the product page of JSP Ltd’s website: www.jspsafety.com... -
Page 3: Applications
Field of Use Class 4 protection against dust particles. BEFORE USE: PowerCap Infinity also has the facility to be able to accept the JSP Sonis helmet mounted hearing protection to provide protection against the ® ®... -
Page 4: Battery & Airflow Check
Sufficient airflow must be checked as described in the Battery and Airflow Check section. contact JSP Ltd for further advice. The HUD lights should always be the primary method of assessing flow levels. 2. Place the helmet on the head, pressing the head firmly into the padding at the front of the helmet. Tighten the helmet strap by turning the wheel ratchet at the rear of the helmet clock-wise. -
Page 5: Warning Scenario Table
Infinity so that your maintenance records can be kept ® ® HOOKS using JSP’s Asset Management system. This allows you to have full control over your PowerCap Infinity giving full access in the field to inspection ® ® dates, compliance documentation, product instructions and much more. Visit www.jspcheck.com to enable your RFID device. -
Page 6: Removing & Replacing The Visor
REMOVING & REPLACING THE VISOR: (Care should be taken to avoid scratching the visor surfaces during fitting) REMOVING & REPLACING THE DRIVE UNIT & VISOR CARRIER ASSEMBLY: 1. Remove the visor. Pull the seal skirt out of its locating channel. Start the removal from either end. DO NOT PULL FROM THE MIDDLE. See Battery &... -
Page 7: Removing & Replacing The Harness Strap
Storage temperature and humidity ranges • Only use genuine Powercap Infinity filters supplied in pairs from JSP Ltd or its distributors. • Do not lift the visor whilst in the hazard zone ® ® close to live parts on installations not exceeding •... -
Page 8: Warranty 14
JSP Ltd will replace defective parts as required at no charge. JSP Ltd’s liability will not exceed the value of the original sales receipt for the device. In the event of valid claims under this warranty JSP Ltd will not be liable for loss of use of any of its products or for any incidental, indirect or consequential cost,... -
Page 9: Replacement Parts
Infinity ® ® AKG179-P01-100 CEU170-001-100 Carry-Case *Other colours available on request JSP Ltd, Worsham Mill, Minster Lovell Oxfordshire, OX29 0TA Helmet Harness Technical Helpline: +44(0)1993 826051 CEU190-000-000 Email: technicalservices@jspsafety.com www.jspsafety.com Strap Certified by: BSI (NB0086). ISSUED: 02/18 BSI UK, Kitemark Court, Davy Avenue, Knowlhill, RFPZ-001-000 Milton Keynes, MK5 8PP.
Need help?
Do you have a question about the Powercap Infinity and is the answer not in the manual?
Questions and answers