HP MediaSmart Frame 100 User Manual page 19

4 Click Scan. If you are connecting to a wired network, the connection will complete
automatically. If you are connecting to a wireless network, continue to the next step.
5 Press the Down Arrow button to select the network name of the wireless router to which
you want to connect. Then click Continue. The Network Password Setting page
appears.
Or
If the name of your chosen network is not shown, select Other. Then click Continue.
The Other Network Setting page appears.
Note: The Network Password Setting page and the Other Network Setting page are
nearly identical, but the Other Network Setting page has a Network Name field that
can be edited.
Note: If the wireless router is using any security, you will need to know some of the
following information:
Network name (also known as the server set identifier, or SSID). This is displayed if
the wireless router has broadcasting of the SSID enabled. It is case sensitive
Security - the security type used by the router. The choices are: None, WEP (OPEN),
WEP (SHARED), WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and WPA2-
PSK (AES)
Password - The password for WEP and WPA security types is a key that is
generated by a passphrase that is entered when the router is configured. The key is
what you need to enter in the password field.
6 If you are starting at the Other Network Setting page, Network Name is the first field.
Press OK to select the keyboard. Otherwise, go to step 9.
7 Use the arrow buttons to select the first character of the network name. Then press OK.
Continue until you have spelled out the new network name.
8 Use the arrow buttons to select Enter on the keyboard. Then press OK.
9 Press the Up Arrow and the Down Arrow buttons to select the desired security option
from those listed in the Security field.
10 Press the Right Arrow button to select the Password field. Then press OK to select the
keyboard.
11 Use the arrow buttons to select the first character of the password. Then press OK.
Continue until you have spelled out the password.
12 Use the arrow buttons to select Enter on the keyboard. Then press OK.
13 Press the Right Arrow or Left Arrow button to move among the network fields and the
Continue and Back buttons. Click Continue when you have completed your network
configuration.
The picture frame successfully connects in a few seconds if the network is configured
properly.
Automatic Power On
1 Press OK. The Time Setting page appears.
2 Press the Up Arrow to enable and press the Down Arrow to disable Automatic Power
On.
HP MediaSmart Frame User Guide 13