Adjusting The Cutting Height - Gtech CLM2.0 Operating Manual

Adjusting the cutting height

50mm
60mm
70mm
80mm
The mower has 6 cutting height settings
between 30mm and 80mm.
Note that the 30mm and 40mm settings will
scalp uneven lawns and reduce your lawn's
resistance to wear and drought.
Using the Cordless Lawn Mower
Push the mower along at a walking pace when
mowing.
WARNING: to reduce risk of personal injury, wait for the blade to stop rotating and
remove the safety key before adjusting the cutting height.
16 16
For very level,
30mm
fine- leaved
40mm
For a healthy, level,
hard-wearing lawn
For longer grass, uneven
ground and damp grass
lawns
To adjust the height, hold the lever firmly and
move it into the notch required.
When mowing on uneven ground, it is
suggested you test the cutting height on
a small patch of grass, to avoid cutting
too deep and creating bald patches.
When the filling indicator flap closes, it is time to
empty the bin. Note: if the bin over-fills, the grass
chute will clog and the flap will close again.