Basic Mode - Hanna Instruments Edge Instruction Manual

LCD Contrast Permits
modification
of the display
contrast for
various lighting
conditions
Flash Format Permits
Only seen when
formatting the
log errors are flash drive.
present.
Message User may choose
Transition how messages
are displayed on
3rd LCD line of
display.
Reset Config To Press the MODIFY key and CFM (when prompted) to
Default reset parameters.
Instrument Displays firmware
Firmware/ Probe version of meter.
Firmware Using the u
key switches to
Probe firmware
(if connected)
and diagnostic
made for
troubleshooting.
Meter ID 4 digit numeric
Note: Parameters that are grayed out are seen under special conditions only.
edge™ offers a basic operation mode that streamlines measurement
configuration for pH and EC measurements and is useful for many routine
applications. Basic pH SETUP reduces parameter selection to the basic set.
The meter limits calibration to 5 standard pH buffers; 6.86, 7.01, 4.01, 9.18
and 10.01 buffers. All pH measurements will display, log and export with 0.01
pH resolution. Interval logging is also eliminated. Manual and Manual stability
Logs on demand are still functional. pH CONDITION, RESPONSE graphs are not
displayed, giving the display a "Basic" measurement screen with just pH data
1 to 8 3
On or Off OFF
Word scroll Letter scroll
messages or messages
letter scroll
messages
View only Current
firmware
version.
User selectable 0000
General
Available
Setup
Available
Available
Available:
RESETS with
Basic Mode OFF.
Available
Available

Basic Mode

Setup/Installation
17