Operation - BD 172668 Operating Instructions Manual

BD DROP SAW
VISE
Loosen wing nut until vise is
opened enough for material.

OPERATION

Inspect saw for any damage, verify electric cords are not crack or damaged. Check blade for damage.
Verify saw is on a flat, solid surface.
(A)
Check the power switch is in
the OFF position.
(D)
Verify proper water flow on both
sides of the blade. Lower the cut-
ting head. Perform the cut. Do not
force the saw.
(A)
Plug-in the power cord
using a GFCI.
Turn saw OFF immediately
after finishing cutting.
With material in vise, tighten wing
nuts until front and back jaws are
tightly securing material.
(B)
(E)
14
OPERATION
(B)
(C)
Turn saw ON.