REXROTH A2FO Series Manual

Industrial Electric Drives
Hydraulics and Controls
Fixed Displacement Pump A2FO
for open circuits
Sizes 5...1000
Series 6
Nominal pressure up to 400 bar
Peak pressure up to 450 bar
Inhalt
Features
Ordering Code / Standard Program
Technical Data
Ordering Code - Size 5
Unit Dimensions, Size 5
Unit Dimensions, Sizes 10, 12, 16
Unit Dimensions, Sizes 23, 28, 32
Unit Dimensions, Size 45
Unit Dimensions, Sizes 56, 63
Unit Dimensions, Sizes 80, 90
Unit Dimensions, Sizes 107, 125
Unit Dimensions, Sizes 160, 180
Unit Dimensions, Size 200
Unit Dimensions, Size 250
Unit Dimensions, Size 355
Unit Dimensions, Size 500
Unit Dimensions, Size 710
Unit Dimensions, Size 1000
Preferred Types
Installation and Commissioning Guidelines
Linear Motion and
Assembly Technologies Pneumatics
3...6
Service Mobile
Automation Hydraulics
Features
1 - Fixed displacement pump A2FO of axial piston, bent axis design
is made suitable for hydrostatic drives in open circuits.
2
- Suitable for use in mobile or industrial applications.
- Output flow is proportional to drive speed and displacement.
7
7
- The drive shaft bearings are designed to give the service life
expected in these areas of operation.
8
- Careful selection of the displacements offered, permit sizes to
9
be matched to practically every application.
10
- Favourable power / weight ratio
11
- Compact and economical design
12
13 - Optimum efficiency
14
- One piece pistons with piston rings
15
15
16
16
17
17
18
19
RE 91 401/09.00
replaces: 01.97