Starting A Measurement With The Rc:120A Dbconnect; Starting A Measurement With The Dblink App - Cirrus Research Dosebadge 5 User Manual

5
doseBadge Noise Dosimeter User Manual
Page 30

Starting a measurement with the RC:120A dBConnect

Connect to the doseBadge 5 instrument and select the measure option as shown below:
When the instrument is not measuring, the only option is to start a measurement.
Pressing the Left button will start a measurement and a confirmation will appear for a few seconds.

Starting a measurement with the dBLink App

To start a measurement with the dBLink App, connect to the required instrument from the instrument
discovery window and press the Green run button.
Press again to confirm.
The measurement will start and the available options will change from Start to Pause and Stop.
In this example, the top instrument is ready to start and the bottom instrument is already running. The Pause
and Stop options are available.