Table of Contents
Advertisement
Quick Links
OPERATING INSTRUCTIONS
GB
LEISTER Vulcan E
High Pressure Hot Air Blower
Please read operating instructions carefully before use
and keep for further reference.
APPLICATION
• The LEISTER hot air blower Vulcan «E» is suitable for building into machines,
installations and appliances and is designed for continuous operation.
• Drying and heating processes of various types.
• Heating conveyor ovens or heat tunnels.
• De-icing the runway of a crane and sewage works as well as surface areas,
joints, rails and cables etc.
• Speeding up mixing processes and dissolving foams which can arise during
mixing and filling containers.
• Sterilizing of packaging materials such as bottles, corks and containers.
• Activating and loosening solvent free adhesives and melt adhesives.
• Separating and fusing synthetic fibres and fabrics.
• Shrinking of heat-shrink sleeves, films, tapes, solder sleeves and moulded
parts.
• Soldering copper pipes, solder joints and metal foils.
• Removing plastic mould flash and putting a shine on plastic surfaces.
• Welding of thermoplastic materials.
• Igniting wood shavings, paper, coal or straw in furnaces.
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16
Официальные поставки www.mikst.ru
www.leister.com
sales@leister.com
1
®
Advertisement
Table of Contents
Related Manuals for Leister Vulcan E
Summary of Contents for Leister Vulcan E
-
Page 1: Operating Instructions
Please read operating instructions carefully before use and keep for further reference. APPLICATION • The LEISTER hot air blower Vulcan «E» is suitable for building into machines, installations and appliances and is designed for continuous operation. • Drying and heating processes of various types. - Page 2 Официальные поставки www.mikst.ru WARNING Danger! Unplug the tool before opening it, as live compo- nents and connections are exposed. Incorrect use of hot air tools can present a fire and explosion hazard, particularly in the proximity of flammable materials and explosive gases. Danger of getting burned! Do not touch the heater tube and nozzle when they are hot.
- Page 3 - the hot air tool is not in direct line of the hot air flow from another hot air tool. • For use in a dusty environment the tool should be fitted with a LEISTER stainless steel filter on the air intake connection (4). Where a particularly critical dust problem exists (eg metal, electrically charged or damp dust) special filters must be used to avoid short circuiting the tool.
- Page 4 • As required, reduce the air flow with the air slide (3). • Adjust the hot air temperature via the potentiometer (2). • The LEISTER Company, as well as the authorized Sales and Service Centres, offer advice and an introduction to the areas of application of hot air tools, free of charge (see page 1).
Need help?
Do you have a question about the Vulcan E and is the answer not in the manual?
Questions and answers