Leister Hotwind S Operating Instructions

Leister Hotwind S Operating Instructions

Hot-air blower

Advertisement

Quick Links

OPERATING INSTRUCTIONS

GB
LEISTER Hotwind S
Hot-Air Blower
Please read operating instructions carefully before use
and keep for further reference.

APPLICATION

• The LEISTER Hotwind S is suitable for continuous operation. The blower can
be used as a hand or bench tool or can be built into machines, installations
and appliances.
• Drying and heating processes of various types.
• Heating conveyor ovens or heat tunnels.
• Defrosting frozen water pipes.
• Speeding up mixing processes and dissolving foams which can arise during
mixing and filling.
• Sterilizing of packaging materials such as bottles, corks and containers.
• Smoothing the coating on pills, putting a shine on chocolates and cosme-
tic articles.
• Activating and loosening solvent free adhesives and melt adhesives.
• Separating and fusing of synthetic fibres and fabrics.
• Shrinking of heat-shrink
sleeves, films, tapes, solder
sleeves and moulded
parts.
• Soldering SMD and thru-
hole components.
• Soldering copper pipes,
solder joints and metal
foils.
• Welding thermoplastic
materials.
• Removing plastic mould
flash and putting a shine on
plastic surfaces.
• Igniting wood shavings,
paper, coal or straw in
furnaces.
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com
sales@leister.com
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hotwind S and is the answer not in the manual?

Questions and answers

Summary of Contents for Leister Hotwind S

  • Page 1: Operating Instructions

    Please read operating instructions carefully before use and keep for further reference. APPLICATION • The LEISTER Hotwind S is suitable for continuous operation. The blower can be used as a hand or bench tool or can be built into machines, installations and appliances.
  • Page 2 WARNING Danger to life when opening the tool, as live compo- nents and connections are exposed. Therefore, before opening it, disconnect all poles from the mains. Incorrect use of hot air blowers can cause fire and explosion hazard, especially near combustible materials and explosive gases.
  • Page 3 • For use in a dusty environ- ment the tool should be fitted with a LEISTER stain- less steel filter on the air intake (5). Where a parti- cularly critical dust pro- blem exists (eg metal,...
  • Page 4 Check power supply cord (1) and plug for any possible electrical or mechanical damages. SERVICE AND REPAIR • Repairs have to be carried out by authorised LEISTER Service Centres only. They guarantee a specialized and reliable repair service within 24 hours using original LEISTER spare parts.

Table of Contents