Appendix A Regulatory Information; General Statements - 3Com 3CRUSBN275 Quick Installation Manual

Appendix A Regulatory Information

General Statements

The 3Com Wireless Dual Band 11n USB Adaptor (3CRUSBN275; M/N:
WL-606) must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that
comes with the product.
This product contains encryption. It is unlawful to export out of the U.S.
without obtaining a U.S. Export License.
This product does not contain any user serviceable components. Any
unauthorized product changes or modifications will invalidate 3Com's
warranty and all applicable regulatory certifications and approvals.
This device generates and radiates radio-frequency energy. In order to
comply with FCC radio frequency radiation exposure compliance
requirements, a separation distance of at least 2.5 cm (1.0 inch) must be
maintained between the antenna of the device and all persons.
The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada's website www.hc-sc.gc.ca/rpb.
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This equipment should
be installed and operated with minimum distance 2.5cm between the radiator
and your body.
This product must maintain a minimum body to antenna distance of 2.5
cm. Under these conditions this product will meet the Basic Restriction limits
of 1999/519/EC [Council Recommendation of 12 July 1999 on the limitation
: Exposure to Radio Frequency Radiation
1