How To Charge Your Controller - Nacon REVOLUTION Unlimited Pro Controller User Manual

Hide thumbs Also See for REVOLUTION Unlimited Pro Controller:
Table of Contents

Advertisement

- The 'Mode Selection' switch on the back determines if the controller is working
in PS4™ Normal Mode (Position 1) or PS4™ Advanced Mode (Position 2).
- The PC Advanced Mode (Position 3) allows you to switch your controller into
the X-Input Mode for PC* use.
In rare situations the signal can affect, or be affected by, other wireless devices
such as WiFi routers, WiFi repeaters or other Bluetooth
c.

How to charge your controller

Your controller will charge the internal battery, in the following ways:
1/ When connected to the PS4™ system as a wired controller
2/ When being used as a wireless controller and the cable is connected to the
PS4™ system. In this option the internal battery will 'trickle' charge as the
battery is still being used to power the controller ;
3/ When connected to the PS4™ system, with the cable, as a wired or wireless
controller but the controller is in 'Sleep' mode or 'Powered' off.
To check the battery level, in any mode simply press and hold the 'Mic mute' button
on the underside of the controller (for more than 1 second). The profile LEDs will
then light up, as described above. You can now release the mic mute button.
The profile LEDs will show you the battery level as below :
- 75% < Battery level ≤ 100%: 4 profile LEDs are ON
- 50% < Battery level ≤ 75%: 3 profile LEDs are ON (1st, 2nd and 3rd LEDs)
- 25% < Battery level ≤ 50%: 2 profile LEDs are ON (1st and 2nd LEDs)
- 10% < Battery level ≤ 25%: 1 profile LED is ON (1st LED)
- Battery level ≤ 10%: selected profile LED is flashing permanently
To preserve battery life please Power Off your controller after use. To do this press
the 'PS' button until the Player LED turns off. To wake up the controller press the
'PS' button.
To preserve battery integrity, we recommend that you always re-charge when the
LED is RED or is flashing RED.
Note: ensure that your USB ports, of your PS4™ system, are still activated even when the system is in sleep
mode. This way you can charge the controller.
*PC Advanced Mode not tested nor endorsed by Sony Interactive Entertainment Europe.
products.
®
EN /

Advertisement

Table of Contents
loading

Table of Contents