Charging Your Controller - Nacon GC-200WL Instruction Booklet

charging your controller

The NACON GC-200WL wireless controller is equipped with an internal 700mAh battery. To charge this battery
use the supplied Micro-USB cable and connect it to the socket on the top of the GC-200WL. Then plug it into
one of your free USB ports on your PC. The 4 LEDs will light up to indicate that the charging process has started
and will also show the charging level of the battery.
Remark: Please note that the controller can't be used during the charging process.
First-time connection with the Pc
The NACON GC-200WL is a so-called Plug´n´Play device. This means that the necessary driver software should
be installed automatically if you connect it to your computer for the first time. Here are the steps in detail:
• Make sure your that the battery of your GC-200WL controller is sufficiently charged.
• Turn on your computer, wait for it to boot and log in to your Windows® desktop.
• Look for an unused USB slot on your PC and plug in the USB dongle of your NACON GC-200WL controller.
• Windows® will detect the new device and after a few seconds it will start the installation process for the
appropriate drivers. This is shown by a small icon in the taskbar.
• The installation might take a while depending on the speed of your system. Once the installation is complete,
you will be presented with the according message. You can now use your GC-200WL.
Dongle compartment
When not in use, the dongle of your NACON GC-200WL wireless controller can be stored in the socket on the
bottom of the controller to prevent it from loss.
Remark: The dongle compartment is for storage only and does not have any electronic function.
D/X switch
There are different ways for modern computer games to communicate with your controller and vice versa. Your
GC-200WL supports the two most commonly used ones: Direct Input 8 and X-Input.
Sometimes a game only supports one of these two protocols. Since both can´t be run simultaneously, your GC-
200WL features the D/X switch (10) to select one of these two protocols, to make sure it works with all games.
Remark: After changing the protocol, the controller needs some short time to switch.
Do not dispose of this product in a household
waste bin. Please take it to an authorised col-
lection point. Recycling is important and helps
protect the environment by reducing waste.
EN
n
indoor use
double insulation
GC-200WL