aireRyder PEPEO-FN51133 Instructions For Installation And Use Manual

aireRyder PEPEO-FN51133 Instructions For Installation And Use Manual

Ceiling fan model loft
Table of Contents

Advertisement

Available languages

Available languages

INSTRUCTIONS FOR INSTALLATION AND USE
Ceiling Fan Model Loft (FN511XX)
BEFORE YOU START
Proper use:
This product is intended exclusively for non-commercial use as ceiling fan.
-
The product has to be installed and used in accordance with these instructions.
-
Any use of this product that is not in accordance with these instructions will void the legal
-
warranty of the manufacturer.
Please keep the original carton and packaging material as the warranty will only be honored if product
is returned in complete original packaging.
FOR YOUR OWN SAFETY
General safety instructions:
For the safe use of this product, you need to have read and understood these instructions
-
before installing or using the product.
Please follow all safety instructions! If you ignore these safety instructions, you will endanger
-
yourself and others.
Keep these instructions for future reference.
-
All parts of this product have to be installed properly in order to ensure safe operation.
-
Modification of the product and use of non-approved parts are prohibited.
-
This product is not intended for use by persons (including children) with reduced physical,
-
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the product by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the product.
Electrical safety:
The electrical installation must be performed by a qualified electrician and must be in
-
accordance with national and local regulations.
Use a fault-current circuit breaker with a rated residual current of no more than 30 mA.
-
Make sure to install an all-pole disconnection switch having a contact separation of at least
-
3mm between poles in the supply wiring to the ceiling fan.
Before connecting the appliance to the electrical grid, make sure that it will only be operated
-
within the specified parameters.
The fan must be properly grounded to avoid the risk of electric shocks.
-
Switch off the power before connecting, repairing or cleaning the fan.
-
Install only bulbs of the type intended for your fan.
-
Storage and transport::
Always store the fan in a dry environment.
-
Protect the fan from damages during transport.
-
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEPEO-FN51133 and is the answer not in the manual?

Questions and answers

Summary of Contents for aireRyder PEPEO-FN51133

  • Page 1 INSTRUCTIONS FOR INSTALLATION AND USE Ceiling Fan Model Loft (FN511XX) BEFORE YOU START Proper use: This product is intended exclusively for non-commercial use as ceiling fan. The product has to be installed and used in accordance with these instructions. Any use of this product that is not in accordance with these instructions will void the legal warranty of the manufacturer.
  • Page 2: Installation

    Safety instructions specific to this fan: Attach the fan only directly to the ceiling structure. The carrying capacity of the ceiling structure from which the fan is hung must be at least 100kg. The minimum distance between the blades of the fan and the floor must be 2.3m. Never mount the fan outside or in a humid or wet environment.
  • Page 3 2. Hang the fan assembly with the ball joint onto the mounting 1. Pass the supply wires through 3. Install the remote control bracket. Make sure the guide pin the hole in the mounting bracket. receiver in the bracket as shown. of the bracket is fitted into the Secure the mounting bracket to a Make sure that you do not trap...
  • Page 4: Operating The Fan

    OPERATING THE FAN Check the fan before switching it on! Risk of injury: The fan can only be operated if no defects have been found upon inspection. In case a part is defective, it will have to be replaced before using the fan. Risk of injury: Before changing the fan rotating direction, the fan has to be switched off and come to a complete stop.
  • Page 5: Malfunctions - Trouble Shooting

    MALFUNCTIONS – TROUBLE SHOOTING Risk of injury: Inappropriate repairs can lead to the fan not functioning safely. This can cause a hazard for yourself and your environment. Most malfunctions are caused by small errors which you can easily resolve by yourself. Please check the following table before contacting your retailer.
  • Page 6: Bevor Sie Beginnen

    INSTALLATIONS- UND BEDIENUNGSANLEITUNG Deckenventilator Modell Loft (FN511XX) BEVOR SIE BEGINNEN Bestimmungsgemäßer Gebrauch: Das Gerät ist ausschließlich zum nichtgewerblichen Betrieb als Deckenventilator bestimmt. Das Gerät muss entsprechend den Vorgaben dieser Anleitung installiert und betrieben werden. Jede nicht bestimmungsgemäße Verwendung bzw. alle nicht in dieser Anleitung beschriebenen Tätigkeiten am Gerät stellen unerlaubten Fehlgebrauch ausserhalb der gesetzlichen Haftungsgrenzen des Herstellers dar.
  • Page 7 Gerätespezifische Sicherheitshinweise: Der Deckenventilator muss in einer Mindesthöhe von 2,30 m (Abstand vom Boden zu den Rotorblättern) installiert werden. Das Gerät darf nur direkt an die tragende Deckenstruktur montiert werden. Der Deckenventilator darf nur an Decken angebracht werden, die mit einer Last von mindestens 100 kg belastet werden dürfen.
  • Page 8 1. Führen Sie die Zuleitungskabel 2. Hängen Sie die Decken- 3. Installieren Sie den Empfänger durch die Öffnung im Montage- ventilatoreinheit mit der Kugel- der Fernbedienung wie ab- bügel. Befestigen Sie den aufhängung an den Montag- gebildet. Stellen Sie sicher, dass Montagebügel an einem Decken- ebügel.
  • Page 9: Bedienung

    BEDIENUNG Vor dem Einschalten Gerät überprüfen! Vorsicht, Verletzungsgefahr: Das Gerät darf nur in Betrieb genommen werden, wenn beim Überprüfen keine Fehler gefunden werden. Ist ein Teil defekt, muss es unbedingt vor dem nächsten Gebrauch ersetzt werden. Vorsicht, Verletzungsgefahr: Vor dem Einstellen des Richtungsschalters das Gerät immer stromlos schalten und warten, bis es vollständig zum Stillstand gekommen ist.
  • Page 10: Störungen Und Hilfe

    STÖRUNGEN UND HILFE Vorsicht, Verletzungsgefahr: Unsachgemäße Reparaturen können dazu führen, dass das Gerät nicht mehr sicher funktioniert. Sie gefährden damit sich und ihre Umgebung. Oft sind es nur keline Fehler, die zu einer Störung führen. Meistens können Sie diese leicht selbst beheben.

Table of Contents