[F1 SS +]
[F1 SS -]
[F1 TC +]
[F1 TC -]
[F1 TT S 23.10]
[F1 TT ?]
......[F1 TT 71.32]
[F1 TT +]
[F1 TT -]
[F1 IS ?]
......[F1 IS 0-+S]
[F1 IS +]
[F1 IS -]
......[F1 IS R]
Stirrer
Turn stirrer on (stir rate must be set manually).
Turn stirrer off.
Temperature Control
Turn temperature control on.
Turn temperature control off.
Target Temperature
Set target temperature to 23.10 ºC.
What is the current target temperature?
Target temperature is 71.32 ºC.
Turn on automatic reporting of manual changes to the target temperature
Turn off automatic reporting of manual changes to the target temperature
Instrument Status
What is the current instrument status?
Response is four parameters:
number of unreported errors is 0 (0 to 9)
stirrer is off (+ is on, - is off)
temperature control is on (+ is on, - is off)
temperature is stable (S is stable, C is changing)
Automatically report instrument status whenever it changes
(e.g., due to manual changes at controller)
Stop periodic or automatic reports of instrument status.
The controller has been powered off and back on again.
10
Need help?
Do you have a question about the qpod 2e and is the answer not in the manual?