Installation; Operating Instructions; Ceramic Contact Grills; Adjusting The Handle - Pantheon CGS1S Operating Manual

Contact Grill Collection Operating Manual

Installation


The installation of the unit must only be performed by a qualified technician.

Confirm that the device is positioned on a solid, even, safe and stable surface that tolerates
the weight of the unit.

Ensure no flammable products are placed near the unit.

Position the device appropriately so that the plug is always accessible.

Check the unit isn't placed close to any water.
Please Note: The Installation instructions applies for all Contact Grills

Operating Instructions

Ceramic Contact Grills

Ceramic Glass is not porous like metal contact grills, so it will not absorb or transfer flavours. They
are perfect for cooking sandwiches.
Please follow the instructions below to ensure the Ceramic Contact Grill is used correctly:

Turn the contact Grill on and set the desired temperature

The Contact grill preheats in just minutes. You will notice the temperature light illuminates,
indicating that power is going to the grill

the grill will be preheated and ready to start cooking in about 2 or 3 minutes

When the power light is no longer illuminated, the grill is ready to use.

Sandwiches will usually take between 2 - 5 minutes to heat throughout. The cooking time
depends upon the bread you use and the ingredient you have chosen for your sandwich

Most of your Panini sandwiches will be grilled at temperatures between 250℃ and 280℃

Light pressure is all you need when lowering the op grill to assure a perfectly cooked
sandwich. Excessive pressure will not speed up the cooking process

To keep your grill clean between sandwiches, simply wipe the grill surfaces with a clean oiled
paper towel.
Adjusting the Handle Tightness
Within the Instruction Bag there is an Alan Key which can be used to make adjustments if the
movement of the handle is too loose or tight.

Ensure the machine is turned off and unplugged

Use a screwdriver to open the rear cover

Adjust the hex screws contained in the rear to provide tightness

If a noise is made when the handle is moved apply some lubricant oil to the middle hole of
the copper base,

Close and secure the rear cover once finished.
Pantheon Catering Equipment
Vulcan Works, Dixon Street,
Bolton, BL6 7PH
–
CGS1S, CGS1R, CGS2S, CGS2R, CGL1S, CGL1R, CGL1S/R, CGL2S, CGL2R, CCG1S, CCG1R, CCG2S, CCG2R, CPG
Web: www.pantheonce.co.uk
Email: Info@pantheonce.co.uk
Tel: 0800 0461570
Fax: 0800 0461571
3