I N S T A L L A T I O; Before Connection; Electrical Connection - Smeg FMC24X-1 Instruction Manual

BEFORE CONNECTION

• Check whether your oven has suffered any damage during transport (deformed door or
door seal, etc.). If you see any signs of damage, contact your dealer before use.
In order to easily locate the reference informationfor your appliance,we recommend that you
notethese data on the "After-Sales ServiceDepartment and Customer Relations"page.
• Verify the power voltage. If there is a PERMANENT undervoltage (200-210 volts), consult your
electrical installer.

ELECTRICAL CONNECTION

• Your installation must be protected by a 16 Amp thermal fuse.
• It is mandatory to use a power point with a ground terminal, connected in accordance with
current safety regulations.
• Your electrical installation should allow an accessible device to the user, who should be able
to disconnect the appliance from the mains, either with the plug, or with a switch ub accor-
dance with the wiring rules.
• Never operate the oven if the supply cord and/ or its plug are damaged. In case of damage,
call in a specialised technician trained by the manufacturer.
Ensure that:
-The electrical installation has sufficient voltage.
-The electrical wires are in good condition.-
-The diameter of the wires complies with theinstallation requirements.
The electrical connections are made before theappliance is installed in its housing.
Warning:
We cannot be held responsible for anyaccident resulting from an inexistent,defectiveor
incorrect ground lead.If the oven malfunctions in any way,unplug theappliance or
remove the relevant fuse at theoven's connection lead-in.
Installation
89