P R O G R A M M I N G T H E F A N + M I C R O W A V E F U N C T I O; L I N K E D P R O G R A M M E - Smeg FMC24X-1 Instruction Manual

Programming the fan + microwave function
Example : to cook a 1 kg roast beef
Set the roast in a non-metallic roasting pan, dress and season to taste. Put the pan on the
rack in the low position and place together on the center of the turntable.
with the fan key :
▼ ▼
Press the fan key
▼ ▼
1 1 7 7 5 5 ° °
flashes, requesting you enter the desired cook temperature, ex. 200°,
with the selector knob
▼ ▼
0 0 0 0 : : 0 0 0 0
Wait until
ex. 30 minutes, with the selector knob
▼ ▼
Press start , the programme begins.
To guarantee quality cooking results a low microwave power level is programmed.
You may link 2 different programmes, combining any of the available functions :
microwave / grill / microwave + grill / rotisserie / fan / fan+ microwave.
Example : Using linked programming to defrost ten minutes followed by simmer
level microwave + grill programme for 20 minutes
① ①
Proceed as if setting only a defrost programme :
- press the key and select the defrost function with the selector knob
- set the programme time (ex. 10 min).
② ②
Instead of pressing START, programme the next operation :
- press the grill key
- set the programme length by adding the microwave + grill time (ex. 20 min)
to the defrost time.
③ ③
Press START .
The linked microwave + grill programme will automatically begin at the end of the defrost
programme.
twice, is displayed.
˚C
.
flashes, requesting you set the programme length
Linked programmes
and select the microwave + grill function with the selector knob
˚C
.
104
2 0 0 °
3 0 : 0 0
1 0 : 0 0
3 0 : 0 0