ASROCK X99 WS-E/10G Manual page 29

Serial ATA3 Connectors
(SATA3_M0_M1:
see p.1 or p.4, No. 14)
(S_SATA3_2_3:
see p.1 or p.4, No. 15)
(S_SATA3_0_1:
see p.1 or p.4, No. 16)
(SATA3_0_3:
see p.1 or p.4, No. 18)
(SATA3_1_4:
see p.1 or p.4, No. 19)
(SATA3_2_5:
see p.1 or p.4, No. 20)
Serial ATA Express
Connector
(SATA_EXP0:
see p.1 or p.4, No. 21)
X99 WS-E/10G / X99 WS-E
hese twelve SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
*If the eSATA port
(eSATA1) on the rear I/O
has been connected, the
internal S_SATA3_3 will
not function.
If the S_SATA3_2 has
been connected, the SATA
DOM (SATA_0) will not
function.
If M2_1 is occupied by a
SATA-type M.2 device, S_
SATA3_0 will be disabled.
* RAID is supported on
SATA3_0 ~ SATA3_5
ports only.
Please connect either
SATA or PCIe storage
devices to this connector.
he SATA Express
connector is shared with
the SATA3_4 and the
SATA3_5.
*he SATA Express
interface is a combination
of SATAE_1, SATA3_5,
and SATA3_4.
27