Invacare Alegio NG User Manual page 19

4.
a. Lock the brakes of the 2 bottom castors of the bed
base and position them inwards to avoid that they
touch the ground during the manipulation.
b. Align square glide bushings of base assembly with
brackets D and push the bed base onto the trolley as
far as possible.
5.
Lift end of base assembly into a vertical position,
allowing the square glide bushings to engage into the
brackets D. Secure base to trolley with spring pins.
1561872-F
6.
Place the Verso II side rails (if applicable) into
cross-channel of the trolley E.
7.
Place bed ends (if applicable) onto trolley hooks F.
Operating the bed
19