Initial Power-Up; Select A Language; Set The Time And Date - Suzuki C10 Configuration Manual

Dual Engine Configuration
This section shows you how to set-up a dual-engine
configuration using three (3) C10 Color Displays,
two fluid level sensors, two engine interfaces, and
one GPS.
This is a typical dual-engine configuration using
three C10 Color Displays. You may choose to
set-up your vessel differently by adding or reducing
the number of accessories.

Initial Power-Up

NOTE:
The C10 should be connected to a dual cable or
Suzuki Precision Control (SPC) motor, and then be
powered up. It is now ready for configuration.
Once the C10 Color Display is turned ON, the
Suzuki "S" logo appears. The C10 then takes 25 –
30 seconds to power-up to the first screen.

Select a Language

The first screen to appear is the Select Language
screen — use the arrow buttons to select the
proper language, then press Enter.

Set the Time and Date

NOTE:
With a GPS installed, the local time offset is
automatically populated.
25