Installation Instructions; Tools Required For Installation; Refrigerator - GE DFE Series Owner's Manual & Installation Instructions

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING
Built-in style models (model PYE, CYE, GYE, PWE,
doors open. These models must be secured with the
anti-tip floor bracket to prevent tipping forward, which
could result in death or serious injury. Read and
follow the entire installation instructions for installing
the anti-tip floor bracket packed with your refrigerator.
IMPORTANT
•
and ordinances. Save these instructions for local
inspector's use.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
future reference.
• Skill level –
basic mechanical skills.
• Completion time –
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
TOOLS YOU MAY NEED
Adjustable Wrench
Compression Nut
26
Tip Over Hazard.
—
Observe all governing codes
can vary
30 minutes
Pencil
Pliers
Level

Refrigerator

GE and GE Profile™ models
PREPARATION
MOVING THE REFRIGERATOR INDOORS
the Refrigerator section.
WATER SUPPLY TO THE ICE MAKER AND
DISPENSER
to be connected to a cold water line. A GE
Appliances water supply kit (containing tubing, shutoff
cost from your dealer, by visiting our website at
GEAppliances.com (in Canada at
www.GEAppliances.ca
Accessories, 888.959.8688 (in Canada
&
Phillips-Head Screwdriver
Allen Wrenches
Torx T20, T25
Tape Measure
49-60792-2