Description Of The Controls; Front Panel; Information Display - Smeg DWF614SS Instruction Manual

3. Description of the controls

3.1
All the dishwasher controls are grouped on the front panel.
10
3.2
LIGHTING
Pressing the ON/OFF button (1) will start the dishwasher and will lit up the dishwasher pilot light
(7). After approximately 3 second from this operation the DISPLAY (9) will be turned on with a
visualization that will depend upon the state of the dishwasher.
PROGRAMMING
In this dishwasher model all the programming operations are possible only with closed door. With
open door, on the DISPLAY (9) will appear the symbols -- and the PILOT LIGHT PROGRAMS (8)
remains out.
SELECTION PROGRAM
By pressing the relative button of desired program (see table) it will lid up the relative pilot light to
confirm that the operation did occurred on the DISPLAY (9) will appear a program duration
forecasting ("h.mm").
30
User instructions

Front panel

1 ON/OFF BUTTON
2 SELECTION PROGRAM BUTTONS (P1...P5)
½ LOAD WASH BUTTON (certain models only)
3
4 ECO DRYING CYCLE BUTTON (certain models only)
5 DELAY PROGRAM BUTTON (certain models only)
START/STOP BUTTON
6
7 POWER ON LIGHT
8 PROGRAMS INDICATOR LIGHTS
9

INFORMATION DISPLAY

RECESSED DOOR HANDLE
Information display
The dishwasher is equipped with a practical DISPLAY which
provides information on the programmed dishwasher functions.
The program selection is possible through the
relative buttons (2).