End Of Cycle; Removing The Dishes - Smeg Dishwasher DF41-7 Instruction Manual

User instructions
If the door has to be opened while washing is in progress, the program
will be interrupted. The relative light will keep flashing and a beeper will
signal that the cycle has not been completed. You must wait about
1 minute before closing the door to restart the program. When the door
is closed the program will continue from where it was interrupted. This
operation should only be carried out if strictly necessary, because it
might cause problems in execution of the program.

END OF CYCLE

At the end of the washing cycle the
dishwasher gives a short acustic signal and
the program indicators nr 4 and 5 start
blinking (the word "end" is displayed on the
window).
To switch off the dishwasher, open the door and press the ON/OFF
button (1).

REMOVING THE DISHES

At the end of the washing program, wait at least 20 minutes before
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is advisable to unload the lower basket first, and then the
upper basket.
13